The Properties internal command can be used to:
Command Arguments:
Argument |
Type |
Possible values |
Description |
---|---|---|---|
(no argument) |
- |
- |
Display the system Properties dialog for selected files and
folders. |
ADDLABEL |
/O |
(no value) |
In conjunction with the SETLABEL argument, this lets
you add one or more labels without clearing any existing
ones. Can be combined with SETLABELTOGGLE to toggle a single
label. |
|
|
shift |
If a keyword is specified, the labels will only be added if the
specified key is held down when the function is run - otherwise the
ADDLABEL argument will be ignored and they will replace
existing labels as normal. Example: Properties SETLABEL red ADDLABEL=ctrl |
FILE |
|
<filename> |
Specifies the filename rather than using selected files. This is the
default argument for the Properties command so you do not
need to specify the FILE keyword. If the filename
includes spaces make sure you enclose it in
quotes. |
FOLDEROPTIONS |
/S |
(no value) |
Display the Folder Options dialog for the current
folder. |
FORMATLIST |
/O |
(no value) |
Displays a generated list of your favorite and content type folder
formats (acts as a dynamic
button). This displays one item for each format saved in the Favorite
Formats category on the Folder Formats page
in Preferences. Selecting a format from the generated list applies its
settings to the current file
display. |
|
|
favorites |
Only displays favorite formats (omits those for content
types). Example: Properties FORMATLIST=favorites |
|
|
contenttype |
Only displays content type formats (omits those for
favorites). Example: Properties FORMATLIST=contenttype |
|
|
noreset |
Prevents the addition of the "reset" commands which are normally
generated at the end of the format list (e.g. Reset to
Defaults). Example: Properties FORMATLIST=favorites,noreset |
FTPSITE |
/S |
(no value) |
Display the FTP Site
Properties dialog for the currently connected FTP site. If you are not
currently viewing an FTP directory this command has no
effect. |
LABELCATEGORY |
/K |
<category> |
When used on a command that generates a list of labels (e.g. Properties SETLABEL or Properties SETLABEL !menu) this argument lets you filter the generated list by category. It accepts one or more comma-separated wildcard strings which let you match the name of categories to include.
You can match uncategorized labels using the pattern ~* (which means "not anything").
Special handling exists for the two predefined categories,
Status and Colors; these can be referenced using the
English names prefixed with raw: and will work in any
language. Example: Properties SETLABEL !menu LABELCATEGORY raw:~(Status) |
LISTER |
/S |
(no value) |
Displays the system Properties dialog for the folder currently
displayed in the source file
display. |
NOFROMFOCUS |
/S |
(no value) |
The default behaviour for the Properties command
is to operate on either the source file display, or the Folder Tree,
depending on which one has the input focus. This lets you use the same
command to access the Properties dialog for folders in the tree
as well as files and folders in the file display. Specify this argument to
force the command to always operate on the source file display and ignore
the folder tree. |
SETLABEL |
/O |
(no value) |
Displays a generated list of your configured labels (acts as a dynamic button). Selecting a label from
this list applies it to all selected files and folders. This command supports embedded functions when
it's used to generate dynamic
buttons. |
|
|
<label>[,<label>,...] |
Applies the specified label or labels to all selected files and folders. Multiple label names must be comma-separated. Commas and back-slashes in label names must be escaped with a back-slash.
You can combine this with the ADDLABEL argument to add
labels to existing ones rather than replacing them. You can further
combine it with SETLABELTOGGLE to toggle labels on and
off. |
|
|
!menu |
Places the generated label list inside a menu. Example: Properties SETLABEL !menu |
|
|
!submenu |
Generates submenus for each label category. Example: Properties SETLABEL !submenu |
|
|
!submenu2 |
Generates submenus for each label category, and places labels without a
category in an Uncategorized group. Example: Properties SETLABEL !menu,!submenu2 |
|
|
!nogroup |
Labels are grouped by category by default; specify
!nogroup to ignore categories and generate a flat list of
labels, sorted only by name, with labels from different categories
intermingling. Example: Properties SETLABEL !menu,!nogroup |
|
|
!noreset |
After automatically generated lists of labels, a Reset option is
normally added. You can prevent this by specifying
!noreset. Example: Properties SETLABEL !noreset |
|
|
!nostoponmatch |
After automatically generated lists of labels, a Stop On Match option
is normally added, if multiple labels matching a single file is enabled in
Preferences. You can prevent it being added by specifying
!nostoponmatch. Example: Properties SETLABEL !nostoponmatch,!noreset LABELCATEGORY raw:Status The example above would give you top-level buttons, directly on the toolbar, to toggle each of the Status labels, with no extra buttons cluttering up the toolbar. |
|
|
!reset |
Removes the label from all selected items. You can combine this with
the LABELCATEGORY argument to only remove labels in
certain categories. |
SETLABELINFS |
/K |
yes |
Specify in conjunction with the SETLABEL argument to
override the state of the Preferences / Favorites and Recent / File and
Folder Labels / Automatically store labels in the file system if
possible option. Labels will be stored in the file system
even if that option is disabled. |
|
|
no |
The labels will be stored in your Opus
configuration. |
SETLABELREMOVE |
/O |
(no value) |
Specify in conjunction with the SETLABEL argument to
remove labels. If the targeted file or folder already has the specified
label, the label will be removed. Otherwise nothing will
happen. |
|
|
shift |
If specified, the SETLABELREMOVE argument will only
apply if the specified key is held down when the function is
run. Example: Properties SETLABEL=Bold SETLABELREMOVE=alt |
SETLABELTOGGLE |
/O |
(no value) |
Specify in conjunction with the SETLABEL argument to
toggle labels. If the targeted file or folder already has the specified
label, the entire label will be cleared instead. Combine with ADDLABEL to toggle only a single label,
while leaving any other labels the file has alone. |
|
|
shift |
If specified, the SETLABELTOGGLE argument will only
apply if the specified key is held down when the function is run. If the
key isn't held down, the label will only be turned on - it won't be
toggled off again. Example: Properties SETLABEL=Bold SETLABELTOGGLE=shift |
SETWALLPAPER |
/O |
(no value) |
Sets the selected image file as the system wallpaper. Opus will make a
copy of the selected image file (and convert its format if necessary) -
you can change where the copy is stored with the setwallpaper_file
option on the Miscellaneous / Advanced
page in Preferences. |
|
|
center |
The wallpaper mode will be set to center the image on
screen. |
|
|
tile |
The image will be tiled across the
screen. |
|
|
stretch |
The image will be stretched (or shrunk) to fill the screen
completely. |
|
|
fit |
The image will be cropped if necessary to fill the screen. The aspect
ratio of the image will be preserved. This is only available on Windows 7
and above. |
|
|
fill |
The image will be stretched or shrunk to fill screen, but the aspect
ratio will be preserved - and so black bars may be displayed on the sides
or top and bottom of the image. This is only available on Windows 7 and
above. |
|
|
span |
The image will be spanned across a multiple monitor desktop. This is
only available on Windows 8 and above. Example: Properties SETWALLPAPER span |
|
|
menu |
Displays a drop-down menu of the various wallpaper modes (acts as a dynamic button). Selecting
a mode from this menu sets the selected image file as the wallpaper using
that mode. This is useful when added to the context menu for the
Images file type
group. |
SINGLE |
/S |
(no value) |
Modifies the behaviour of the Properties command when
more than one file or folder is selected. By default a combined
Properties dialog is shown for all selected items, but if
SINGLE is specified an individual Properties
dialog is shown for each
item. |